Loading... Please wait...

3 Dyson DC17 Aftermarket Belts -Original Part #:911710-01 ---Belt #10-3300-03

3 Dyson DC17 Aftermarket Belts -Original Part #:911710-01 ---Belt #10-3300-03

$28.99
Quantity

Product Description

Three Dyson DC17 AfterMarket Cogged Belts
Original Part Number: 911710-01
Part Number Printed on Belt: 10-3300-03       3M-225-9        129 PJ24 C


If you have questions, email us thru E-Bay Messaging.

May be slightly different than in photo.

 

WHY do vacuum belts NEED Changed if they're not broken?
It's hard to get a new vacuum belt on because it is much shorter than the old belt. Every day your belt looses elacsticity (think of a 2 inch rubber band that you stretch to 4 inches and leave it that way for a few months) Even if your vacuum has never been turned on the belt is stretching and loosing elasticity as you read this. Every single day it doesn't work quite as well as the day before. It will still pick up hair and light dust but can't agitate the heavy sandy, gritty soils to the surface of the carpet fibers to be sucked out of the fibers. After 6 months the brush-roll really starts to slow down. It may even stop spinning completely when the vacuum cleaner nozzle is lowered onto the carpet. Warning: Almost ALL vacuum cleaners have two very important filters that must be occasionally cleaned and/or replaced to prevent pre-mature motor failure. Many consumers use their vacuum week after week simply just dumping the dirt cup because they bought a  vacuum that has "lifetime" or "washable" filters.

    If you want your vacuum cleaner to last years instead of months you MUST perform these easy-to-do steps that are very simple if performed frequently enough.

    To work properly your vacuum cleaner must pull a large volume of air into the vacuum, filter and trap the dirt from the airflow and then exhaust the air back into your home.

    Even the finest or most expensive bag or cyclonic, whirlwind, or windtunnel type vacuum cleaner  can't filter all the grit and fine dust from the large volume of fast moving air. 
   
1.    The pre-motor filter prevents sand and grit from being sucked into the motor. If you don't clean and/or replace this filter frequently it's like you are throwing grains of fine gritty sand into your motor continously whenever it is running. The gritty soils quickly build up in your vacuum motor grinding away at the moving parts in your vacuum motor.

    On most vacuum cleaners (especially ones with "lifetime" filters) the pre-motor filter needs to be cleaned and/or washed after each use.  If the pre-motor filter is washable you should own at least two so you have one to use while the other is drying. A washable filter can take days to dry . If  you put it back in the vacuum while it still has moisture in it you will be sucking that moisture into your vacuum motor which can cause the motor parts to rust. 

2.    After the airflow passes through the motor it exits the vacuum through the HEPA Exhaust filter which has very, very tiny pores to filter out microscopic contaminants.  If you don't replace the Exhaust filter often enough you will be spewing the allergens, mold and mildew spores, etc. back into your home and the air your family breathes. Most of these microscopic particles are too small to be seen with the naked eye and are continually floating through the air in your home waiting to be inhaled into you or your family's lungs contributing to allergic reactions and asthma.

3.    As these two filters trap soils and allergens they become clogged which restricts the airflow passing through the motor. The airflow is what keeps the motor cool and prevents premature motor failure.

       Most of the vacuum cleaners brought into my store for repairs have suffered pre-mature motor damage because the owner neglected to clean and/or replace the filters They didn't realize they had a problem until it was too late. Don't let it happen to you  and ruin the motor in your vacuum cleaner.

I hope this helps you to maintain your vacuum cleaner making it last for many years.

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Click the button below to add the 3 Dyson DC17 Aftermarket Belts -Original Part #:911710-01 ---Belt #10-3300-03 to your wish list.